breadcum

Fluid Bed Processor

  • Home
  • Fluid Bed Processor

Salient Features

  • Very Versatile Process Equipment.
  • Fully Automatic Operation Based On PLC Control. (Optional)
  • Minimum Handling And More Hygienic.
  • Top Mounted Telescopic Cylinder For Auto Bag Shaking. (Optional)
  • Clamp Type Bottom Mesh For Container.
  • Capacity Available From 2.5 Kgs. To 300 Kgs.
  • MOC SS 304 / SS 316 / SS 316 L
  • cGMP With Documentation.
  • AISI 316Q Product Contact Parts.
  • AHU with Double skinned & insulated (Inner side SS 304, Outer GI - Powder Coated)
  • Auto Shake System For Filter Bag
  • Contact Parts SS 316 & Non-Contact Parts SS 304
  • cGMP Construction With SS 316 Contact Parts.
  • Designed As Per cGMP Model
  • Explosion rupture flap to the rear of the machine
  • Intrinsically Safe Earthling Arrangement With Low Voltage Relay Shall Be Provided On Demand.
  • Inflatable gaskets for Product Bowl & Filter Bag
  • Inlet Air Handling Unit With Filters
  • Operation Panel with PLC & 4" HMI
  • Product Container with Trolley & Positive Earthing
  • Pneumatic rod less cylinder for Bag Lifting & Lowering (on side leg)
  • Pneumatic On / Off dampers at inlet & exhaust
  • Pneumatic Sealing For Product Container
  • Pneumatic Container Lifting And Bag Shaking Arrangement.
  • Pneumatic Container Sealing Arrangement To Meet USFDA Requirements.
  • Quick Dismantling of Dutch Sieve & Perforated Sheet at the Product container
  • Steam / Electrical Heating Mode, To Suit Site Conditions.
  • Specially Designed Explosion Flap Provided For The Additional Safety Of The Equipment.
  • Specially Designed Retarding Chamber To Provide Extra-Large Heat Transfer Area, Exposed Each And Every Particle Of The Charged Batch In The Fluidized Air Resulting In Uniform And Fast Drying.
  • Tubular Construction Of Container Trolley Mounted On PU Wheels Imparts Rigidity To Carry The Product Container With The Charged Load.
  • Uniform Drying With Steam Or Electric Heating
  • Unit Available With / Without HEPA Filtration Facility.
  • Unit Available With / Without CIP/WIP Facility
  • Uniform Drying with reducing Drying time

Optional Features

  • Air Velocity Measurement
  • Additional Product Container
  • Connectivity For Scada System
  • Conidur Mesh (For Helical Fluidization)
  • De Humidifier Valve (Chill Water Control)
  • Inlet & Exhaust Damper
  • Inlet Air Humidity Measurement
  • Exhaust Filter
  • Flameproof Construction
  • Filter Bag Blockage Monitoring
  • HEPA Filter Monitoring
  • PLC System (Touch Screen)
  • Provision For Top Spray System
  • Spray Ball Assembly
  • Solid Flow Monitoring
  • Silencer At Exhaust Blower
  • Two Piece Design With Pneumatic Sealing For Finger Bag
  • WIP System

Salient Features

  • Product Bowl Interlocking
  • Automatic Temperature & Controls, Process Cycle Controls.
  • Explosion Flap At Retarding Chamber.
  • Safe Earthling System For Static Current.
  • Air Pressure Switch To Ensure Pressure Limit.
  • Emergency Stop Button & Overload Relay Protection.

Technical Specifications

MODEL AIMS–FBD–15 AIMS–FBD–30 AIMS–FBD–60 AIMS–FBD–120 AIMS–FBD–200 AIMS–FBD–300 AIMS–FBD–400 AIMS–FBD–500 AIMS–FBD–600
Gross Volume (Liter) 46 Liter 71 Liter 142 Liter 280 Liter 475 Liter 650 Liter 870 Liter 1,055 Liter 1,350 Liter
Maximum Batch Capacity Working Volume (Kg) (BD 0.5 Kg / m3) 0 To 15 Kg 20 To 30 Kg 40 To 60 Kg 80 To 120 Kg 160 To 200 Kg 200 To 300 Kg 300 To 400 Kg 400 To 500 Kg 500 To 600 Kg
Air Flow (CFM) + 10% 430 CFM 706 CFM 1060 CFM 1880 CFM 2590 CFM 3235 CFM 3825 CFM 4000 CFM 4705 CFM
Steam Consumption (Kg / Hour 30 Kg / Hour 50 Kg / Hour 80 Kg / Hour 140 Kg / Hour 216 Kg / Hour 250 Kg / Hour 288 Kg / Hour 344 Kg / Hour 384 Kg / Hour
Blower Electric Motor (HP) 7.5 HP 7.5 HP 10 HP 20 HP 25 HP 30 HP 40 HP 50 HP 50 HP
Electric Heater (kW) 18 kW 20 kW 36 kW 60 kW 90 kW 110 kW 130 kW 150 kW 190 kW
Electrical Power Supply 230 Volts ± 10% Or 440 Volts ± 10% / 50 Hz Or 60 Hz / 3 Φ Phase / A.C. Power Supply
Drying Temperature (°C) 35-80 °C
Compressed Air Pressure (Bar) 8 Bar